Telescopic Banner Stand - HARDWARE

Telescopic Banner Stand - HARDWARE

Preparing Files for Print

General Artwork Preparation Guidelines

  1. Download our template/guide to ensure proper placement of images and text.
  2. Each order submitted including multiple paged projects MUST be submitted as a single PDF file. Please ensure that all pages have the proper orientation to ensure proper back up. They must also have bleed and make sure each page are all the same size.
  3. It is always a best practice to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center. Even a hairline difference can cause your design to look off centered.
  4. File must consist of a 1/16" bleed (books and magazines will require an 1/8”). All of the relevent graphics and text must be within the safety margin unless you intend to have part of it cut off(this is sometimes the desired effect, so please make sure it is done the way you would like it printed)
  5. Ensure that your PDF process colour (CMYK) and saved in high resolution. As a rule it is suggested all files should be saved at 300 DPI. Spot Colours and coating will need to be set up as such within the chosen layers. Additional charges will apply if applicable.
  6. We recommend that all black type should have the following values: C0, M0, Y0, K100.
  7. Make sure all of your fonts are properly embed or outline when saving your file as a PDF.
  8. In order to achieve the best colour results, it is important for you to supply your artwork as CMYK files. If your artwork is submitted as RGB, it will be converted to CMYK and may not match the colours you are expecting. Please note that all offset printed work is printed in CMYK or PMS and can not be produced in RGB unless converted. This is an automated process for us and we suggest if you are designing your files, you should also consider designing in CMYK mode instead of RGB.

See our FAQ page for more details.

Large Format Guidelines

  1. Although bleed is not required for large format projects, often it is preferred. When saving your artwork if you wish to have bleed, please add 1/8” to your canvas size.
  2. Please compress your file using a ZIP file compressor to reduce the file size and speed up the uploading process when submitting your orders.

Coated 1 Side (C1S) Guidelines

  1. Please follow the general artwork guidelines and…
  2. Be sure that the first page of your PDF file is the side that you want to be on the coated side of the card. Please keep in mind that the second page of your PDF will always be printed on the uncoated side.

Envelopes Guidelines

  1. Please use crop marks to help us align your logo placement. In the absence of crop marks, printing will be 3/8” from the top based on general industry standards for envelopes.
  2. All text must be within the safe margin. Envelope artwork cannot have bleed unless they have been custom quoted by our estimating department and if this is the case, the must be submitted as a custom upload order.
  3. Please make sure that you do not have creative or text 1/8” from any of the edges.

Numbered Tickets Guidelines

  1. In order to make sure your ticket order is numbered correctly, ensure that you include the following files:
    1. Your PDF file of your artwork (with no numbering in the artwork)
    2. Also include an excel or csv file containing list of numbers you will need printed on your tickets.
    3. Please make a mock up version of your artwork showing where and how you need the numbers placed. Please make sure this file is clearly labeled as a mocked up sample.

Variable Printing Guidelines

  1. In order to make sure your variable printing order is produced correctly, please ensure that you include the following files:
    1. Your PDF file of your artwork (without any variable text in it).
    2. Also include an excel or csv file containing list of variable data you need printed on your order.
    3. Please make a mock up version of your artwork showing where and how you need the variable data placed. Please make sure this file is clearly labeled as a mocked up sample.
       

These free standing telescopic banner stands, also known as a Step and Repeat Banner Stand and Jumbo Banner Stand, are versatile, having the ability to be used as both a single or double sided banner display unit. Adjustable on both width and height, the unique telescopic design can display banners ranging from 52" to 95" wide and from 36" to 96" tall.

The banner stand is constructed with ease of use and durability in mind. The stand features an aluminum framed body for easy set-up and convenient transportation. With two 4lb, 18" long steel base plates, our telescopic banner stand can hold up large light-weight banners and is well suited for any indoor trade show environment.

The telescopic banner stand is ideal for use as a backdrop/background display for trade show booths and presentations; also perfect to display promotions or for use in the office lobby. Requiring only a few minutes to set up, you can use our stands for multiple occasions and tasks without any headaches.

Telescopic banner stands can be used with banner graphics (vinyl/fabric). The banner graphics are hemmed on the top and bottom. Another way to attach the banner is by having grommets placed in by simply zip-tying them to the top and bottom pole. For further specifications please refer to the instruction manual or give us a call if you have any questions.

For custom orders please contact us

  • $189.99

Available Options

Tags: banner stand, step and repeat stand, media wall, telescopic stand, free stand, trade show display

Powered by PitchPrint